QuikPak - Wafer Preparation, Unlimited Packing Solutions, Custom Assembly Services

Flip Chip Bonding & Assembly

Flip Chip assembly is the direct electrical connection of face-down (flipped) electronic die onto organic or ceramic circuit boards by means of conductive bumps on the chip bond pads. This process is quickly gaining popularity over traditional face-up wire bonding due to its advantages in circuit board real-estate reductions, performance, reliability, and cost over other packaging methods.

Quik-Pak enhances bonding capabilities

Quik-Pak has enhanced its Flip Chip bonding capability by installing a Finetech Pico Flip Chip bonder. The bonder is capable of placing pre-bumped devices within a 1µm placement accuracy. Assembly applications include µBGA, standard flip-chip, 3D packaging, optoelectronic bonding and assembly, sensors, chip on glass, and more.

Quik-Pak Offers:

Device Ball Bumping

  • Solder ball bump to 305µm (0.012") diameter on a 508µm (0.020") pitch
  • 96C, 183C, and 217C alloys available

Device/Partial Wafer Stud Bumping:

  • Gold (Au) stud bumping of partial wafers and large die
  • Stud bumping pitch down to 150µm

Bonding:

  • Align down to 1µm placement accuracy
  • Placement and bonding down to 100µm pitch devices
  • Thermo-compression bonding of small gold-to-gold leads (highest accuracy)
  • Thermosonic bonding of gold-to-gold leads (lower temperature)
  • Hot air solder reflow for Sn, SnPb, and other solders

Underfills

  • Standard underfills for BGA and flip chip assemblies
  • Reworkable underfills for BGA and flip chip assemblies where recovery of the substrate may be required/li>
ITAR Registered ISO 9001